Description

MAUI 11 G3 SUB

Powered 2 x 8" Subwoofer for MAUI 11 G3

Crisper and more powerful bass with additional LD MAUI 11 G3 SUB subwoofer.

With the MAUI 11 G3 SUB subwoofer, you extend the cardioid characteristics of our professional column speaker series right into the bass range.

What does this mean?

Simply position the SUB next to your MAUI® 11 G3 facing the rear direction, switch on the Cardioid preset and you will have a quieter and controlled Low-End on the back while still keeping the punch on the front. Low-End frequencies on the back of the system will be dampened by -15 dB. For extra Bass, keep the SUB in the same direction as your MAUI® 11 G3 and switch off the Cardioid preset.

Setting up the SUB with your MAUI® 11 G3 is straight forward and fast. Thanks to its automatic set-up detection system the SUB immediately switches to FOLLOWER mode as long as no column is attached. Also recommendable is the protection cover and castor board to make transportation easy and keep the SUB as long as possible free of any touring-damage. The MAUI® 11 G3 SUB features the same design construction as the MAUI® 11 G3 subwoofer and will be the perfect addition to get your Low-End in control.

Features

Powered 2 x 8" subwoofer with flow-optimised bass-reflex ports
2 x 8" custom-designed woofer with deep bass down to 39 Hz
Preset for cardioid subwoofer configuration
DynX® DSP (Gen. 2) technology for distortion-free sound at maximum volume
Automatic Setup Detection (MAIN / FOLLOWER)
Rugged subwoofer housing made out of polyurea-coated birch plywood
Shockproof front grille for ultimate speaker protection
Two ergonomic handles for easy handling

Specifications

General

Product type: PA subwoofer
Type: Subwoofer
Color: Black or White
Max. SPL (Peak): 125 dB
Frequency response (-10dB): 39 Hz - 200 Hz
Weight: 45.19 lbs
Features: Bluetooth Audio Streaming, DSP-based Signal Processing, Excellent Sound Dispersion, Mono/ Stereo Application

Subwoofer

Woofer dimensions: 2 x 8 "
Woofer magnet: Ferrite
Woofer brand: Custom-made
Woofer voice coil: 2 "
Cabinet construction: Bass Reflex
Housing material: 15 mm Multiplex
Cabinet surface: Polyurea

Amplifier module (integrated in subwoofer)

Amplifier: Class D
System output (RMS): 730 W
System output (Peak): 1460 W
Protection circuits: DC protection, Multiband limiter, Short circuit, Thermal protection
Cooling: Convection
Controls: Bluetooth, Cardioid On/Off, Main level, Power On/Off, Sub level Indicators Bluetooth, Cardioid On/Off, Follower mode, Power, Protect (protection circuit engaged), Signal, Subwoofer Mode
Mains connector: IEC power cable (included)
Operating voltage: 100 V AC - 120 V AC, 50 - 60 Hz, 220 V AC - 240 V AC, 50-60 Hz
Fuse: T 3.15AL / 250 V
Power consumption: 300 W
Ambient temperature (operating): 0 - 40 °C
Relative Humidity: < 80% (non-condensing)
Line Inputs: 2
Line Input Connectors: Combo XLR / TRS
Line Outputs: 1 x Sub OUT, 2 x THRU
Line Output Connectors: XLR male
Number of speaker outputs: 1
Loudspeaker Output Connectors: Custom-made multipin
Bluetooth Standard: A2DP
Bluetooth Audio Decoder: AAC, SBC