VRX918SP

VRX918SP

JBL Professional

$3,720.00
SKU:
VRX918SP
UPC:
50036903509
Width:
25.00 (in)
Height:
22.00 (in)
Depth:
33.00 (in)
Shipping:
Ships free on orders over $35

VRX918SP

18 in. High Power Powered Flying Subwoofer

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

Features

  • Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
  • 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and light weight.
  • Integral rigging hardware for simple connection of enclosures and optional array frame.
  • 20 mm threaded pole socket for solid, secure satellite speaker mounting.
  • Large port area for reduced distortion.

Specifications

Power Rating: 1500 Watts PeakLF: Dual-Bridged Technology™, Class D

Frequency Range: 31 Hz – 220 Hz

Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)

Frequency Range (-10dB): 31 Hz – 220 Hz

Maximum Peak Output: 126 dB SPL at 1m

Bandpass Nominal Impedance: LF: 2 x 2 ohms

LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive® woofer with neodymium-magnet

Inputs: XLR with loop through

User Controls: Input Attenuator (0-16 dB)Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru.

System Processing: DSP based, resident in Input Module

System Management: DSP based limiters for mechanical and thermal protection

AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz

AC Line Voltage: User selectable: 120V/240V (-15%, +10%)

AC Input Connector: Neutrik PowerCon (NAC 3MPA)

AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)

AC Current Requirements: 6A per system at 120V, 3A per system at 240V

Enclosure: 18 mm birch plywood.

Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts

Finish: Black DuraFlex™ finish

Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam

Net Weight (each): 38.5 kg (85 lb)

Optional Accessories: VRX-AF array frameSRX718S-CVR: Pull-over padded cover (works with WK-4S) SS4-BK adjustable satellite speaker pole WK-4S Caster kit

Outputs: 1 x XLR

Nominal Impedance: LF: 2 x 2 ohms

Related Products

!