The T Series is a very flexible and cost effective amplifier platform loudspeaker processor.

All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.

The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

• The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium sized systems and stage monitors. The T Series can be controlled and configured in different ways.
• Full control with a PC running Armonía. Here it can be in mixed groups with advanced EQ together with other Powersoft products.
• Control from the front panel display for things like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring.
• Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point to control EQ etc.
• Group controllable advanced EQ with raised cosine filters
• Large preset library
• Preset compatibility with X Series
• Very long FIR filters (42.6 ms)
• Control and monitoring through ArmoníaPlus

  General
  Number of channels	4
  Output power	Single channel mode						Bridge mode
  	2 Ω	4 Ω	8 Ω				4 Ω	8 Ω
  	750 W	750 W	750 W				1500W	1500W
  Max output voltage / current	145 Vpeak / 50 Apeak
  AC Main Power
  Power supply	Universal, regulated switch mode
  Nominal power requirement	100-240 V ±10%, 50-60 Hz
  Operating voltage	90 V - 264 V
  Power consuption**	115 V					230 V
  Idle	32 W					32 W
  1/8 of max output power @ 4 Ω	532 W		4.7 A			525 W		2.7 A
  Thermal
  Operating temperature range		0° - 45° C - 32° - 113° F
  Thermal dissipation**	115 V					230 V
  1/8 of max output power @ 4 Ω	537 BTU/h		135.3 kcal/h			512 BTU/h		129.0 kcal/h
  AUDIO
  Gain 32dB Input sensitivity 2.57 Vrms Max input level 24 dBu
  Frequency response	20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
  S/N ratio	> 110 dB (20 Hz - 20 kHz, A weighted)
  THD+N	< 0.1% (typical < 0.5%)
  IMD	< 0.1% (typical < 0.5%)
  Input impedance	20 kΩ balanced
  DSP
  AD Converter	24 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range - 0.005% THD+N
  DA Converter	224 Bit Tandem™ @ 48 kHz 125 dB-A Dynamic Range - 0.003% THD+N
  Memory/presets	256 MB (RAM) plus 512 MB flash for presets /
  Input equalizer	Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
  Crossover	linear phase (FIR), Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct (IIR)
  Delay	2 s (input) + 100 ms (output) for time alignment
  Limiters	TruePower™, RMS voltage, RMS current, Peak limiter
  Damping control	Active DampingControl™ and LiveImpedance™ measurement
  Front panel
  Indicators and Controllers	8 x Push-button - Setting operating parameters 1 x Display - Settings and monitoring 1 x Power switch -
  Connectors
  AC main	1 x IEC C20 connector - 20 A max (region-specific power cord provided)
  Audio signal input	4 x XLR - Signal input
  Loudspeakers	2 x speakON - Neutrik NL4MD
  Network/data	1 x Rj45 socket - RS485 data connection (non-DSP version) 1 x Rj45 socket - DANTE®
  Construction
  Dimensions (L x H x W)	484 mm x 44.5 mm x 405 mm (19.1 in x 1.8 in x 16.0 in)
  Weight	7.1 kg (15.7 lb)

  
  * Data is subject to change without notice.