Circuit Cue
Testing AC Electrical Circuits
How To Use:
Test the receptacle outlet for power and detect wiring problems before you connect.
- Plug the (KLEIN or Gardner Bender) tester into each receptacle being tested to verify the circuit is on and wired correctly.
- Then plug the Circuit Cue into a receptacle outlet.
- With an IEC cable plugged into the bottom of the Circuit Cue, use an extension cord to access an AC receptacle away from the original receptacle plug that the circuit cue is plugged into.
Note: When the light is ON you have two separate circuits/breakers.
Used by DJ Barr
