ASB7118

ASB7118

JBL Professional

$4,500.00
SKU:
ASB7118
UPC:
691991011801
Width:
26.00 (in)
Height:
24.00 (in)
Depth:
36.00 (in)
Shipping:
Calculated at Checkout

ASB7118

Ultra Long Excursion High Power Single 18" Subwoofer

The ASB7118 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s exclusive 2269H Ultra Long Excursion 18" Differential Drive® woofer. This woofer features neodymium magnet, dual voice coils and dual gaps, JBL’s exclusive Vented Gap Cooling™ and ultra robust composite cone for high excursion and extra long life. Woofer is capable of a peak-to-peak maximum excursion of 89 mm (3.5").

Features

  • 2269H 18" Differential Drive® dual voice coil dual gap, neodymium magnet transducer
  • 2000 watts continuous pink noise, 8000 watts peak power handling capacity
  • Ultra Long Excursion
  • Large vent area for high output with low distortion
  • FIR Tuning Set Matches Phase Profile to Full-Range Models
  • For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products

To improve reliability in weather conditions and reduce water ingress, cabinet dimensions of WRC & WRX models may be different than standard model dimensions. Contact CustomAudio@harman.com for drawings and/or dimension information of WRC & WRX models.

Specifications

Frequency Range (-10dB): 22 Hz - 1 kHz

Frequency Response (±3 dB): 34 Hz - 1 kHz

Transducer Power Rating (AES): 2000 W (8000 W peak), 2 hrs

System Power Rating: 1200 W (4800 W peak), 100 hrs.

Maximum SPL (1m): 25 Hz - 200 Hz: 129 dB-SPL cont avg (135 dB peak)

System Sensitivity: 25 Hz - 200 Hz: 96 dB-SPL, 1W (2.83V) @ 1m

Nominal Impedance: 8 ohms

LF Driver: 1 x 2269H, 460 mm (18 in) dia., 100 mm (4 in) Dual Coil Dual Gap neodymium Differential Drive® VGC™ driver

Enclosure: Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood

Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side) M10 threaded hardware

Finish: Black DuraFlex™ finish. White available upon request.

Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Environmental: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical orientation): 546 x 560 x 815 mm (21.5 x 22.0 x 32.1 in)

Net Weight (each): 42.9 kg (94.5 lb)

Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers.

Nominal LF Driver Impedance: 8 ohms

!