ASB6125

ASB6125

JBL Professional

$3,680.00
SKU:
ASB6125
UPC:
691991011733
Width:
21.00 (in)
Height:
40.00 (in)
Depth:
28.00 (in)
Shipping:
Calculated at Checkout

ASB6125

High Power Dual 15" Subwoofer

The ASB6125 is a high power, lightweight front-loaded vented subwoofer enclosure housing two JBL 2265H-1 Differential Drive® dual voice coil dual gap 15" woofers. These woofers feature neodymium magnets and ultra robust cones for extra long life.

Features

  • 2 x 2265H-1 15" Differential Drive® dual voice coil dual gap, neodymium magnet transducers
  • 1600 watts continuous pink noise, 6400 watts peak power handling capacity
  • Parallel/Discrete switchable input mode
  • Large vent area for high output with low distortion
  • FIR Tuning Set Matches Phase Profile to Full-Range Models
  • For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products

To improve reliability in weather conditions and reduce water ingress, cabinet dimensions of WRC & WRX models may be different than standard model dimensions. Contact CustomAudio@harman.com for drawings and/or dimension information of WRC & WRX models.)

Specifications

Frequency Range (-10dB): 32 Hz - 1 kHz

Frequency Response (±3 dB): 38 Hz - 1 kHz

Transducer Power Rating (AES): 1600 W (6400 W peak), 2 hrs

Input Modes: Drivers Parallel / Drivers Discrete

System Power Rating: 1350 W (5400 W peak), 100 hrs.

Maximum SPL (1m): 35 Hz - 400 Hz: 132 dB-SPL cont avg (138 dB peak)

System Sensitivity: 35 Hz - 400 Hz: 100 dB-SPL, 1W (2.0V) @ 1m

Nominal Impedance: 4 ohms in parallel-drive mode2 x 8 ohms in discrete-drive mode

LF Driver: 2 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® drivers

Enclosure: Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood

Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware

Finish: Black DuraFlex™ finish.White available upon request.

Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical orientation): 965 x 419 x 597 mm (38.0 x 16.5 x 23.5 in)

Net Weight (each): 36.7 kg (81.0 lb)

Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers

Nominal LF Driver Impedance:

  • 4 ohms in parallel-drive mode
  • 2 x 8 ohms in discrete-drive mode
!