ASB6115

ASB6115

JBL Professional

$2,350.00
SKU:
ASB6115
UPC:
691991011689
Width:
21.00 (in)
Height:
21.00 (in)
Depth:
28.25 (in)
Shipping:
Ships free on orders over $35

ASB6115

High Power Single 15" Subwoofer

The ASB6115 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2265H-1 Differential Drive® dual voice coil dual gap 15" woofer. This woofer features neodymium magnet and ultra robust cone for extra long life.

Features

  • 2265H-1 15" Differential Drive® dual voice coil dual gap, neodymium magnet transducer
  • 800 watts continuous pink noise, 3200 watts peak power handling capacity
  • Large vent area for high output with low distortion
  • FIR Tuning Set Matches Phase Profile to Full-Range Models
  • For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products

To improve reliability in weather conditions and reduce water ingress, cabinet dimensions of WRC & WRX models may be different than standard model dimensions. Contact CustomAudio@harman.com for drawings and/or dimension information of WRC & WRX models.)

Specifications

Frequency Range (-10dB): 32 Hz - 1 kHz

Frequency Response (±3 dB): 42 Hz - 1 kHz

Transducer Power Rating (AES): 800 W (3200 W peak), 2 hrs.

System Power Rating: 675 W (2700 W peak), 100 hrs.

Maximum SPL (1m): 35 Hz - 400 Hz: 126 dB-SPL cont avg (132 dB peak)

System Sensitivity: 35 Hz - 400 Hz: 97 dB-SPL, 1W (2.83V) @ 1m

Nominal Impedance: 8 ohms

LF Driver: 1 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® driver

Enclosure: Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood

Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware

Finish: Black DuraFlex™ finish. White available upon request.

Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical orientation): 483 x 419 x 597 mm (19.0 x 16.5 x 23.5 in)

Net Weight (each): 20.6 kg (45.5 lb)

Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers.

Nominal LF Driver Impedance: 8 ohms

!