PD6212

PD6212

JBL Professional

$7,100.00
UPC:
691991014604
Width:
40.00 (in)
Height:
42.00 (in)
Depth:
31.00 (in)
Shipping:
Calculated at Checkout

PD6212

Precision Directivity Full Range Two-Way Loudspeakers

The PD6212 Series Precision Directivity loudspeakers are designed for applications requiring high output capability with excellent pattern control. The speakers can be utilized alone in music or speech systems where frequency extension to 80 Hz is adequate or combined with subwoofers to create extended bandwidth full range systems.

Features

  • 300 mm (12 in) horn-loaded LF and large format HF driver – high sensitivity design with high continuous SPL capability.
  • Large PT™ Progressive Transition™ waveguides provide broad band pattern control, low distortion at high SPL levels and smooth frequency response.
  • Rotatable low and high frequency waveguide allow either horizontal or vertical cabinet orientation.
  • Sophisticated, steep-slope passive crossover network with switchable bi-amp/passive crossover modes.

To improve reliability in weather conditions and reduce water ingress, cabinet dimensions of WRC & WRX models may be different than standard model dimensions. Contact CustomAudio@harman.com for drawings and/or dimension information of WRC & WRX models.

Specifications

Frequency Range (-10dB): 80 Hz to 18 kHz

Frequency Response (±3 dB): 90 Hz to 16 kHz

Coverage Pattern:

  • /43: 40° x 30°
  • /64: 60° x 40°
  • /66: 60° x 60°
  • /95: 90° x 50°

Crossover Modes: Bi-amp / Passive switchable

Passive Crossover: 6th order (36 dB/oct) Linkwitz-Riley HP & LP, 850 Hz

Transducer Power Rating (AES):

  • LF: 400 W (1600 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs
  • HF: 75 W (300 W peak), 2 hrs

System Power Rating: Passive Mode: 300 W (1200 W peak), 100 hrs

Maximum SPL (1m):

  • LF: 137 dB-SPL
  • HF: 135 dB SPL (141 dB peak)
  • Passive Mode: 134 dB SPL (140 dB peak)

System Sensitivity (1w @ 1m): Passive Mode: 109 dB-SPL

LF Driver: M222-8A 300 mm (12 in) driver with 75 mm (3 in) voice coil

HF Driver: 2453H, 38 mm (1.5 in) exit compression driver with 100 mm (4 in) voice coil

Nominal Impedance: 8 ohms

Enclosure: Trapezoidal with 12.5 degree side angles, 16 mm (5/8 in) exterior

Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware

Finish: Black DuraFlex™ finish. White (-WH) available upon request.

Optional Weather Resistant Versions: WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements.

Grille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam

Input Connectors: Neutrik Speakon® NL4, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through.

Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical orientation): 991 x 673 x 897 mm

Net Weight (each): 79.5 kg (175 lb)

Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.

Nominal LF Driver Impedance: 8 ohms

Nominal HF Driver Impedance: 8 ohms

!