PD5122

PD5122

JBL Professional

$3,550.00
SKU:
PD5122
UPC:
691991031854
Width:
31.00 (in)
Height:
32.00 (in)
Depth:
17.00 (in)
Shipping:
Ships free on orders over $35

PD5122

Full Range / Low Frequency

The PD5122 is intended for use as a flown or ground supported, high power low frequency module used in conjunction with mid/high-only or fullrange systems of the PD5000 series.

Features

  • Dual high power 300 mm (12 in) low frequency drivers.
  • Designed to extend LF pattern control of PD6322 systems.
  • Slot-loaded configuration duplicates LF performance of PD6322.

To improve reliability in weather conditions and reduce water ingress, cabinet dimensions of WRC & WRX models may be different than standard model dimensions. Contact CustomAudio@harman.com for drawings and/or dimension information of WRC & WRX models.

Specifications

Frequency Range (-10dB): 41 Hz to 1 kHz

Frequency Response (±3 dB): 49 Hz to 300 Hz

Transducer Power Rating (AES): 1600W (6400 W peak) 2 hrs

System Power Rating: P1200 W (4800 W peak), 100 hrs

Maximum SPL (1m): 128 dB-SPL cont avg (134 peak)

Input Modes: Drivers Parallel / Drivers Discrete

Nominal Impedance: 4 ohms in parallel-drive mode

Sensitivity: 116 dB-SPL

LF Driver: 2 x JBL 2206H 300 mm (12 in) VGC drivers with 100 mm (4 in) voice coil with minimal power compression and low distortion

Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply

Waveguides:

  • MF: PT-N64MF 600 x 600 mm (24 x 24 in)
  • HF: PT-H64HF 300 x 300 mm (12 x 12 in)

Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included, see optional accessories).

Finish: Black DuraFlex™ finish. White (-WH) available upon request.

Optional Weather Resistant Versions: WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements. WRX for direct exposure or extreme environments.

Grille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam backing (grille cloth backing on white units)

Input Connectors: Neutrik Speakon® NL4, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop through.

Environmental: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX.

Dimensions (H x W x D in vertical orientation): 357 x 673 x 706 mm (14.1 x 26.5 x 27.8 in)

Net Weight (each): 36.4 kg (80 lb)

Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.

Nominal LF Driver Impedance:

  • 4 ohms in parallel-drive mode
  • 2 x 8 ohms in discrete drive mode
!