DVX DM15
The DVX DM15 is a low-profile stage monitor. Unobtrusive yet very muscular, it is designed for sound reinforcement applications that require powerful low-end performance without added subwoofers. It sports a high-performance 15“ neodymium woofer and a 1.4“ neodymium compression driver, coupled to an aluminum“ CD horn.
Paired with high-output digipro digital power amps in a bi-amped configuration, the DVX DM15 belies its unobtrusive look with performance that is far from understated, delivering plenty of power to cover midsized to large stages.
An onboard controller manages the entire system, serving as an active equalizer, active x-over with phase and time alignment, and limiter. The DSP also offers switchable system presets that adapt the monitor’s performance to suit the given application. Made of rugged multiplex and coated with tough black lacquer, the cabinet sets up at two different angles.
It is also equipped with a pole mount, enabling the DVX DM15 to be set on a tripod or speaker pole.
TECH SPECS
Technical Data
Speaker Type: 2-Way Active Stage Monitor
Acoustical Data
Frequency Response [-10dB]: 50 - 20.000 Hz
Frequency Response [+/- 3dB]: 59 - 19.000 Hz
Max SPL: 132 dB
HF: 1.4"
Type HF: Neodymium Compression Driver
Voice Coil HF: Titanium 2.5"
Directivity: 60x40 °
Horn: CD Horn Aluminum
Rotatable Horn: YES
LF: 15"
Type LF: Neodymium
Voice Coil LF: 3.5"
Amplifier
Amp Technology: Digipro®
Amp Class: Class D
Power RMS: 750 W
Peak Power: 1500 W
Cooling: Convection
Processor
Controller: DSP 24 Bit/48 kHz
System Presets: Flat, Monitor
Limiter: RMS, Peak. Thermal, Multiband
Crossover Frequency MF-HF: 1320 Hz
Slope MF-HF: 24 dB/Octave
Mechanics
Housing: Multiplex Plywood
Housing Design: Low Profile Multifunctional
Angles Up: 35, 55 °
Rigging Points: 6x M8
Width: 734 mm (29.36 in)
Height: 338 mm (13.52 in)
Depth: 442 mm (17.68 in)
Weight: 21 kg (46.3 lbs)
Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.
