DVA M2M+M2S

dBTechnologies

MSRP: $3,453.00
$2,819.00
(You save $634.00 )
SKU:
DVA M2M+M2S
UPC:
1030700030
Width:
18.10 (in)
Height:
7.50 (in)
Depth:
13.60 (in)
Shipping:
Ships free on orders over $35

DVA M2M+DVA M2S

Offering the same user-friendliness and sound quality of its DVA predecessors, this 2-Way Active Line Array System sets the new benchmark for high-end sound performance thanks to the innovative Master+Slave design which adds high SPL in incredibly small dimensions and weight. A super versatile system for both portable and permanent installation solutions.

Each unit of DVA MINI system is comprised of two line array modules, each with two 6.5” neodymium woofers and two 1” high-frequency compression drivers. The M2M module is the master module that contains the 400-watt Digipro G3 amplifier that power both the M2M and M2S slave module. The system achieves 126 dB max SPL per unit. 

Constructed in solid Polipropilene reinforced with an internal anti-vibration structure, DVA MINI features a new fast-lock mechanic design: users simply place one module below the other and slide it towards one side until it locks in place. Moreover, every DVA MINI module has a back mechanic with incremental steps allowing different line array positioning angles.

 

TECHNICAL DATA

Speaker Type M2M: 2-Way Active Master Line Array Module

Speaker Type M2S: 2-Way Slave Line Array Module

ACOUSTICAL DATA

Frequency Response [-6dB]: 78 - 19.000 Hz

Frequency Response [-10dB]: 68 - 20.000 Hz

Max SPL: 126 dB per unit

HF: 2x1"

Type HF: Neodymium

Voice Coil HF: 1"

LF: 2x6.5"

Type LF: Neodymium

Voice Coil LF: 1.5"

Directivity: 90x15°

AMPLIFIER

Amp Technology: Digipro® G3

Amp Class: Class D

RMS Power HF Amp: 200 W (100 W + 100 W)

RMS Power LF Amp: 200 W (100 W + 100 W)

Cooling: Convection

PROCESSOR

Controller: DSP 56 bit

AD/DA Converter: 24 bit/48 kHz

System Presets: 9 presets (8x HF and Low-Mid corrections and 1x for service use)

Limiter: Multiband, RMS/Peak, Thermal

Crossover Frequency LF-HF: 1800 Hz

Slope LF-HF: 24 dB/Octave

INPUT

Signal Input: 1x XLR fem, Bal.

Signal Output: 1x XLR male, Bal.

Power Supply: 400W SMPS with PSU Auto-range (110V~ and 220V~)

Power Socket: 1x PowerCon In + 1x PowerCon Out

Signal Input M2S: 1 Custom connector

MECHANICS

Housing: Polypropylen PP

Handles: 2x back side

Fittings: Integrated hardware with fast lock mechanics

Splay Angles: 0°- 1,5°- 3°- 4,5° - 6°- 8°- 10°- 12,5°- 15°

Width: 460 mm (18.1 in)

Height: 190 mm (7.5 in)

Depth: 345 mm (13.6 in)

Weight M2M: 7.6 kg (16.8 lbs)

Weight M2S: 7.1 kg (15.7 lbs)

 

Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.

Videos Hide Videos Show Videos

Related Products