Description

DMA 504

Four Channel Matrix Amplifier

DMA 504 is a four-channel Class-D matrix amplifier providing 4 power outputs of 500 Watts each. Equipped with a powerful DSP platform, inputs and outputs can be managed in terms of routing and equalization. The complete set of processing functions includes PEQ, FIR filters, bass enhancement, limiters, compressors, and environmental equalization. Presets for RCF speakers are available on each channel for optimal acoustic performance and reliability. It can distribute 4 audio channels to other units through an analog audio BUS, combining a flexible and scalable multi-room architecture with an easy connection and installation. Configuration is simple and user-friendly and can be carried out through either the front panel controls (with OLED display) or RDNet. Thanks to its installation flexibility, accurate design, and robustness, DMA 504 is ideal for a wide range of business music and installed sound applications.

Features

4 x 500 W Class-D power amplifier
20 ÷ 20000 Hz frequency range
Full on-board processing
RCF speakers’ presets
Proprietary bass enhancer algorithm
FiRPHASE linear phase filters
Flexible and scalable multi-room architecture
RDNet for networked management
Remote controls and paging console accessories

DMA Series

Class-D amplifiers equipped with a powerful DSP platform, allowing managing inputs and outputs in terms of routing and equalization. A complete set of processing functions is available, including speaker presets, proprietary bass enhancer algorithm, FIR filters, and environmental equalization. Thanks to its extremely compact size, accurate design, and robustness, it is ideal for a wide range of applications.

Scalable architecture

To fit with any installation need, DMA amplifiers have been designed with a highly scalable architecture and each device can distribute 4 audio channels to satellite units. This allows for increasing installed power and creating a multi-room architecture. The connection can be done with just 1 CAT5e cable.

Technical specifications

4 X 500 W @ 4 OHM OR 2 x 1000 W hi-Z

Inputs

2 x LINE STEREO( RCA) (1 alternative to AUX IN on the front panel)
1 x MIC/LINE balanced (removable terminal)
1 x PAGING (RJ 45)

Outputs (signal)

1 x STEREO LINE/SUB (RCA)
1 x 4 CHANNELS AUDIO BUS (RJ 45)

Controls

1 x REMOTE MUTE CONTACT
4 x WALL MOUNT REMOTE CONTROLS
1 x CTRL + FIRMWARE UPDATE USB PORT

Full on-board processing

Equipped with a powerful DSP platform, DMA units integrate RCF proprietary technologies such as FiRPHASE, a FiR filtering technology, and BASS ENHANCER, a sophisticated algorithm that increases low frequencies perception without affecting the output power.

Speakers presets

Pre-loaded presets, to optimize the performance and equalization of any RCF speaker and to have the right RCF signature sound.

Easy and flexible configuration

RCF Business Music products are ready to use in few steps, even faster when connected to the RDNet networked management.

RCF RDNet

Networked control and much more

RDNet is a robust management network and control platform for small, medium and large arena-sized sound systems, as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well) and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.