Blackmagic URSA Viewfinder
The essential accessory for handheld shooting!
If your project calls for a lot of over the shoulder or handheld shooting, you’ll want to add the Blackmagic URSA Viewfinder. You get a high resolution 1920 x 1080 color display that lets you get incredibly accurate focus and the screen is so sharp that it’s impossible to see any individual pixels so it’s just like using an optical viewfinder on a traditional film camera. The viewfinder can be adjusted for either left or right eye use. Simply plug it into the power and SDI viewfinder output, slide it onto the camera using the Shoulder Mount Kit, then start shooting! The viewfinder features a sensor that turns off the screen when you’re not using it to save power and extend the life of the OLED screen.
Description
The Blackmagic URSA Viewfinder is the perfect accessory to make outdoors and handheld shooting with your URSA or URSA Mini digital film camera easy. You get an extremely high quality viewfinder with 1080HD resolution display, true precision glass optics, built in tally light and built in menus, overlays and even a digtal focus chart!
Connections
SDI Video Inputs
1 x 3G-SDI BNC.
Power Input
1 x 4 pin XLR 12V.
Computer Interface
USB 2.0 Mini-B port for software updates.
Features
Display Resolution
Full 1920 x 1080.
Frame Rate
Up to 60fps
Display Type
OLED
Display Pixels
6.22 Million Pixels
Color Precision
24 bit RGB, 16.7 million colors
Focus
4 Element diopter.
Diopter Range
-4 to +3
Controls
Buttons for settings, short cut features and navigating menus.
Overlays
Built in overlay display processor and top mounted buttons.
Eyepiece
Can be tilted vertically and extended for left or right eye use.
Tally
LED tally light.
Mounting Options
Camera mount with adjustment.
Metadata Support
Detects camera information embedded in the SDI signal from URSA, URSA Mini and Blackmagic 3G-SDI Shield for Arduino.
Operating Systems
Mac 10.12 Sierra,
Mac 10.13 High Sierra or later.
Windows 8.1 or Windows 10.
Power Requirements
12V power input via 4 pin XLR connected via 12v power output.
Environmental Specifications
Operating Temperature
0° to 40° C (32° to 104° F)
Storage Temperature
-20° to 60° C (-4° to 140° F)
Relative Humidity
0% to 90% non-condensing
What's Included
Blackmagic URSA Viewfinder
3/8 inch viewfinder mounting thumb screw for URSA
Recommended Accessories
Blackmagic URSA Mini Shoulder kit is required for mounting URSA Viewfinder on URSA Mini or URSA Mini Pro.
Warranty
12 Month Limited Manufacturer’s Warranty.
