AM 2160
Mixer Amplifier
AM 2160 is a mixer-amplifiers with 4 mic-line audio inputs on removable connectors (the first input also has an XLR socket) and 2 aux inputs for music sources (e.g. CD players, tuners, etc.). 160 W nominal output power available either for low impedance loudspeakers or 100 – 70 V constant voltage line.
Features
- Full digital technology Mixer Amplifier 160 W RMS
- 100 V - 70 V and 4 Ohm outputs
- 4 universal inputs with phantom facility on screw terminal connections
- Presence Control and per-channel High-Pass filters
- XLR connector on input 1
- RJ45 connectors on input 2 and 3 for connection to BM3001 microphone
- Configurable Priority settings, VOX facility on input 1
- Selectable aux inputs with two keys on the front panel for music source
- Aux inputs with volume and tone controls
- Music On Hold and PRE outputs
Specifications
Amplifier Specifications
- Amplifier Class: D
- Frequency Response (-3dB): 50 Hz ÷ 14 Hz
- Distortion (THD+N) @ 1 kHz nominal power: <0.3 %
Input Section
- Total number of inputs: 8
- Balanced: 7
- Unbalanced: 2
- Mono: 7
- Stereo: 2
- Line inputs: 2
- Line connectors: RCA
- Mic+Line inputs: 4
- Mic+Line connectors: Euroblock, XLR
- Mic+Line Phantom: 32 V DC
- VOX: Yes
- Paging inputs: 2
- Paging connectors: RJ45
- Paging command: Contact
- General Purpose Inputs (GPI): 2
Output Section
- Signal output number: 2
- Signal output connectors: RCA
- Power output connectors: Euroblock
Processing
- Tone controls: Yes
- High-pass filter: 150 Hz
Configuration and Control
- Configuration: DIP switch, Front panel
- Priority: Yes
- Music on hold: Yes
- Chime tone: Yes
Protections
- Cooling: Convection
- Short circuit: Yes
- Thermal: Yes
- DC: Yes
- Fuses: Yes
Power Requirement
- Operating voltage: 220-240/115 V~ 50/60Hz
- Voltage selection: Internal
- Power consumption (MAX): 350 W
