AM 2080
Mixer Amplifier
AM 2080 is a mixer-amplifiers with 2 mic-line audio inputs on removable connectors (the first input also has an XLR socket) and 2 aux inputs for music sources (e.g. CD players, tuners, etc.). The nominal power: is a 80 W amplifier. The amplifier output is available either for low impedance loudspeakers or 100 – 70 V constant voltage line.
Features
- Full digital technology Mixer Amplifier 80 W RMS
- 100 V - 70 V and 4 Ohm outputs
- 2 universal inputs with phantom facility on screw terminal connections
- XLR connector on input 1
- RJ45 connectors on input 2 for connection to BM3001 microphone
- Configurable Priority settings, VOX facility on input 1
- Selectable aux inputs with two keys on the front panel for music source
- Aux inputs with volume and tone controls
- Music On Hold and PRE outputs
- Digital Chime and Siren built-in generator
Specifications
Amplifier Specifications
- Frequency Response (-3dB): 50 Hz ÷ 16 Hz
- Distortion (THD+N) @ 1 kHz nominal power: <0.3 %
Input Section
- Total number of inputs: 5
- Balanced: 5
- Unbalanced: 1
- Mono: 4
- Stereo: 2
- Line inputs: 2
- Line connectors: RCA
- Mic+Line inputs: 2
- Mic+Line connectors: Euroblock, XLR
- Mic+Line Phantom: 30 V DC
- VOX: Yes
- Paging inputs: 1
- Paging connectors: RJ45
- Paging command: Contact
Output Section
- Signal output number: 2
- Signal output connectors: RCA
- Power output connectors: Euroblock
Processing
- Tone controls: Yes
- High-pass filter: 150 Hz
Configuration and Control
- Configuration: DIP switch, Front panel
- Priority: Yes
- Music on hold: Yes
- Chime tone: Yes
Protections
- Cooling: Convection
- Short circuit: Yes
- Thermal: Yes
- DC: Yes
- Fuses: Yes
Power Requirement
- Operating voltage: 220-240/115 V~ 50/60Hz
- Voltage selection: Internal
- Power consumption (MAX): 160 W
