ape labs W-Ape transceiver

$600.00 $399.99
(You save $200.01)
  • Best Price Guarantee
  • 24 months 0% Financing* APPLY NOW
  • Free shipping on most orders over $35*
  • Chat with a Sales Rep Now or Call Us at 888-660-6696

  • Apply Now or use Paypal
    UPC:
    4260482880163
    Shipping:
    Calculated at Checkout
    ape labs W-Ape transceiver

    ape labs® W-Ape transceiver

    2.4GHz wireless DMX transceiver & controller

    The W-APE 2.4GHz wireless DMX transceiver will transmit DMX-512 signal up to 3,000ft!

    But it’s more than just a wireless DMX transceiver. Part of the beauty of Ape Labs fixtures is their simple design. Most wireless fixtures don’t have any control buttons or LCD screens on them. So in order to set the DMX channel and adjust their internal settings, a W-Ape (or MobiLight 4) is needed. To start programming, simply turn a wireless fixture on while it’s near the W-Ape. The screen that would normally be displayed on the lighting fixture is instead displayed on the W-Ape.  If you press any button within a few seconds, you’ll be in the light, adjusting settings….and the light will tell you it’s receiving your adjustments by subtlety blinking a dim blue. When you’re done, just wait 5 seconds. The screen on the W-Ape will turn back to its own and the fixture will remember all of your settings. It doesn’t matter if you turn the fixture off or if the batteries die, your settings will be locked in until you change them again.

    Don’t have a DMX controller? No problem. The W-Ape has some on-board controls for simple DMX programming. It also has an intelligent microphone so you can synchronize sound active mode across all fixtures with a centralized microphone. You can even mix and match different Ape Labs fixtures. Or, if you have the Ape Remote, extend the wireless range from 100ft to 3,000ft by pairing it with the W-Ape.

    Finally, the W-Ape can be used to wirelessly update the firmware on your fixtures right from home, if Ape Labs puts out an update.

    WHAT’S IN THE BOX

    W-Ape Transceiver
    -1x W-Ape
    -1x Power supply unit (100–240 V)

    KEY FACTS

    -100% Made & Engineered in Germany
    -3 Year USA Warranty
    -Seamless integration with any Ape Labs fixture & Ape Remote
    -All metal design with premium components
    -3,000ft DMX range (Or extend the Ape Remote’s range from 100ft to 3,000ft)
    -Can be used as receiver to connect non-Ape Labs products to wireless DMX signal
    -Can be used as receiver/repeater to extend DMX range further than 3,000ft

    FEATURES

    -Magnetically mounted optics
    -45-watt, three quad-color RGBW LED (with individually controllable segments)
    -Integrated microphone with beat and sound level recognition
    -More than ten hours of battery life
    -Recessed power switch
    -Three, four, twelve, and twenty-four channel wireless DMX modes (with forty auto programs)
    -Wireless DMX via W-Ape or via MobiLight 4
    -User-replaceable batteries
    -2.4 GHz RF remote control sold separately

    MEASUREMENTS/TECH SPECS

    Size: 7.75″ x 7.75″ x 2.25″
    Weight 2.2lb

    *Estimated monthly payment; individual circumstances will determine exact monthly payment.
    WARNING: Cancer & Reproductive Health Warning Information